Device Setup

Congratulations on your new Home Cloud device! link

Let’s walk you through setting up your new device. There’s a few quick steps to complete to get things up and running.

Step 1 - Unbox and check components link

First, go ahead and unbox your device and make sure you have everything included in the box. You should have the following components included in the box:

1. The Home Cloud device itself

2. The power adapter for the device

3. An ethernet cable which will connect the Home Cloud device to your router

Got everything? If you’re missing anything please reach out to us and we’ll get it straightened out.

Step 2 - Plug things in link

Using the included ethernet cable, plug the Home Cloud device into your router. If you’re not sure how to do this, you can follow steps 1-4 on this guide. Also, feel free to contact us if you have any problems.

Now you can plug in the power adapter. Nothing complicated about this, just plug one end into the wall and the other into the barrel port on the back of the Home Cloud device. The device should immediately turn on (the light on the front will glow blue). If it doesn’t, press the red power button to start it up.

Step 3 - Set up the device link

Home Cloud will take a few minutes to start. After waiting for this, access the setup page on the device to configure it: http://home-cloud.local/getting-started

Step 4 - Use the device link

And you’re done! Install your first app and enjoy your new Home Cloud!

Please let us know if you have any issues or questions.